Release Notes
v 1.0.7.2549
- fix auto updater

v 1.0.7.2546
- fix Trigger Out for PH330
- add HW Filter
- fix Main Filter Config in PTU Files
- fix Automation Interface for Correlations
- fix an exception at breaking a automated measurement
- avoid a possible buffer overrun in ReadFiFo
- reduce config warnings
- fix a potential crash on dark/light design change
- fix Log button color on dark/light design change
- fixed a bug where the marker settings was diplayed incorrectly
- fixed calculation of marker time in T3 mode for measClasses != unfold
- fixed elapsed time in Raw Measurement Method
- fixed stop button and refreshing the data table in Unfold Measurement Method

v 1.0.7.2260
- fix NavigationView Bug (once again)
- implement Auto Updater
- add Automation Interface
 
v 1.0.7.1869
- finished automation v1
- Upgrade Windows App SDK 1.7.1
- fix logfile is empty after first start
- fix logfile for multiple instances
- fix config button is enabled if no devices is connected
- fix serach log

v 1.0.7.1716
- improve Clear Data in correlation
- fix PQ logo
- fix measurement settings for AdjustmentMode Counter

v 1.0.7.1698
- improve autotune routine
- fix curve description for correlation
- fix init GUI (NavigationView Icons, G2 Bin Width..)
- improve logging performance

v 1.0.7.1593
- add SaveDebugDump to snAPI for MH150/160 and PH300 devices
- add DebugDump to Support Request
- catch exception in getCountRates when the USB cable is unplugged

v 1.0.7.1593
- fix initialization of measurement.set
- improve behavior when no device is connected
- add ability to attach custom files to support request
- fix pause in timetrace

v 1.0.7.1546
- fix tmax for negative values in g(2)
- fix MeasControl SW_Start_SW_Stop for MultiHarp 150N
- fix init channels after loading measuremen.set
- add Auto Align Input Channel Offset
- fix load MeasMode & RefSource from setting on first init
- add missing default.PqUni to config

v 1.0.7.1511
- upgrade to Windows App SDK 1.7.0
- enable open UniHarp with PqUni Files
- enable drag and drop PqUni Files on UniHarp
- improve FWHM calculation if multiple peaks are measured
- fixes for multiple file and device handling
- fix empty navigation bar after start
- fix position of incomplete timetraces

v 1.0.7.1422
- fix autoscroll log on 4K monitors
- fix yScale text size and position for 4K monitors
- fix chart size in Time Trace and Correlation on 4K monitors
- export chart picture with or without transparent background
- fix resolution and base resolution timing mode change for TH260P
- an other fix for input dead time and TH260P
- fix an issue where not all data was read on short acquisition times
- fixed some exceptions
- fixed export and save PHU with counts above 2,147,483,647
- add new fileformat PQUNI for in uniharp memory and meaured data
- reduce line flickering in (timetrace) chart
- fix view range in FCS
- save/load last data and memory in config/default.PqUni
- add menu items to globally clear all data
- changed the adjustment mode for time trace to only show the intervals
- cleanup WebView2
- fixed write access for WebView2

v 1.0.7.1106
- fix anoying color bug in Mem Color Palette
- changed increment of Sync Offset and Acq Offset to 1
- don't enable copying of emty curves
- improved ASCII export from time trace and correlations
- fixed possible deadlock at adding a curve into memory
- make chart properties measClass dependent
- fix elapsed time in T3 Mode
- fix keep device config on usb disconnected

v 1.0.7.953
- upgrade Windows App SDK to 1.6.5 (Fixed several memory leak issues.)
- upgrade Win2D to 1.3.2
- fix InputDeadTime for TH260 P
- add histoNumBins to measurement.set
- improve Elapsed Time
- improve Scale Content
- fixes for Scale Ranges at FCS
- set max Unfold Alloc Size to 1e9 events at loading ptu files
- remove timetrace position jittering
- fix timetrace t0 on pause
- fix max number of bins in timetrace
- fix measControl in load meas settings
- fix getting last events from FIFO
- fix showing last bin in timetrace
- fix HH400 HW Histogrammer Adjustment Mode

v 1.0.7.863
- fix SetSyncDeadTime error on TH260P
- fix HH400 HW Histogrammer isActive flag
- fix inputZeroCrossLevel factor
- fix character encoding in support request

v 1.0.7.830
- fix exeption on invalid json confifg
- improve ToastMessages (wrapping & text selection)
- fix data loss on measClass change
- check phone number in support dialog
- add settings switch to hide MeasClass Pixs
- add AcqTime, measControlStartEdge and measControlStopEdge to measurement settings
- improve g2 chart
- improve measurement.set readability

v 1.0.7.689
- rework FCS chart
- fix settings button in toast meassges
- fix default measurement.set typo
- fixed time trace memory drawing

v 1.0.7.410
- enable Restart Measurement for PTU Files
- remove duplicate AddMCountRate in Restart Measurement
- add Number of Sample Points to Correlation View

v 1.0.7.406
- diable GUI during device initialization
- fixed autotune / setInputTriggerLevel 
- add images to md file parser
- add Measurement Mode help
- fix several plot color bugs
- implement MeasClass Items Selector

v 1.0.7.263
- fixed unfold export
- fix color not updated in Color Palette
- fix PlotProps for Correlations
- fixed measMode in start application with ptu file
- add unfoldChannel and unfoldMarker to measurementSettings
- add marker to Measurement Settings
- fix Bug where the Config Marker Edge is set in MarkerEnable()

v 1.0.7.214
- add Release Notes
- fixed Acquisition: Offset Unit
- fix Infobar shadow
- fixed deadlock on Resolution Change while measurement is running
- fix HistoRefChannel, CorrStartChannel, CorrClickChannel in Measurement Settings
- fix SyncTriggerMode in PlotDescription

v 1.0.7.124
- upgrade to WinAppSDK 1.6.4
- fix exception @ to high values of Unfold Preallocation of Events
- show Device Config Warnings Warnings, if Setting Show Other Warnings is not set
- fix autotune sync
- fix multiple line errors
- fix AdjustmentMode in HW-Histogrammer