 |
|
Universal 4-channel detector router for PicoHarp 300 |
PHR 800 |
Specifications
| Detector input |
|
|
| Impedance |
|
50 Ohms |
| Trigger Level |
|
-1.5 V to +2.5 V |
| Voltage Range |
|
actual trigger level ± 3V |
| Trigger Edge |
|
falling or rising |
| Pulse width |
|
>15 ns |
| Dead time |
|
typ. 80 ns |
|
| External Input |
|
|
| Count enable |
|
TTL, 3 V to 5 V, high active |
| Marker 0 - 3 |
|
TTL, 3 V to 5 V, high or low active |
|
| Constant Fraction Discrimator (CFD) |
| CFD level range |
|
0 to -800 mV |
| CFD zero cross range |
|
0 to 20 mV |
| Input Impedance |
|
50 Ohms |
| Output Signal Peak |
|
typ. 700 mV |
| Output Signal Pulse width |
|
typ. 30 ns |
|
| Connectors |
| PicoHarp 300 control port |
|
DVI-I female |
| Input / Output |
|
SMA female |
| Count enable & Marker Inputs |
|
Lemo ERN.00.250.CTL |
|
| Power Consumption |
|
110/240 VAC, 50/60 Hz, max. 25 W |
|
| Dimensions |
|
table top rack 310 × 235 × 140 mm |
All Information given here is reliable to our best knowledge. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications and external appearances are subject to change without notice.
© PicoQuant GmbH, 1998 - 2009
last updated 21.01.2008
|
