| Mainframe |
|
|
| Large, L |
|
1 Slot for Oscillator Module and 1 slot for Sequencer or Signal Splitter Module
|
| only uncooled laser heads |
|
8 Slots for Laser Driver Modules |
 |
| Large, MC |
|
1 Slot for Oscillator Module and 1 slot for Sequencer or Signal Splitter Module
|
| cooled laser heads |
|
6 Slots for Laser Driver Modules |
|
| Small, SC |
|
1 Slot for Oscillator Module |
| cooled laser heads |
|
2 Slots for Laser Driver Modules |
|
| Power supply |
|
100..250 V AC, 50/60 Hz |
|
|
max. 70 W (small) or 150 W (large) |
|
| Oscillator Module |
|
|
| Repetition frequencies |
|
80, 40, 20, 10 or 5 Mhz (user-selectable) |
| External Trigger Input |
|
|
| Amplitude |
|
-5 V to +5 V (maximum limits) |
| Trigger level (adjustable) |
|
-1 V to +1 V (negative slope) |
| Required pulse width |
|
> 5 ns |
| Delay |
|
21.5 ± 3 ns (from trigger input to sync output), jitter < 40 ps |
| Impedance |
|
50 Ohms (dynamic) / 500 Ohms (static) |
| Connector type |
|
BNC (female) |
| Synchronization output |
|
|
| Amplitude |
|
< -800 mV into 50 Ohms (NIM) |
| Pulse width |
|
6 ns |
| Impedance |
|
50 Ohms |
| Connector types |
|
2 NIM-CAMAC and 1 SMA (female) |
|
| Sequencer Module |
|
|
| Inputs |
|
1 trigger NIM (threshold approx. - 400 mV, neg. slope) |
| Outputs |
|
8 trigger NIM (< - 800 mV, 50 Ohms), seperately enabled by switch |
| Delay |
|
12 ± 1 ns (from trigger input to enabled outputs), jitter < 40 ps |
| Operation Mode |
|
Rotational - next enabled output channel is activated by the next input |
|
| Signal splitter module |
|
|
| Inputs |
|
1 trigger, NIM (threshold approx. - 400 mV, neg. slope) |
|
|
1 gating, TTL (High Output is enabled, Low Output is disabled) |
| Outputs |
|
8 trigger, NIM (< - 800 mV, 50 Ohms) |
| Delay |
|
12 ± 1 ns (from trigger input to enabled outputs), jitter < 40 ps |
| Operation Mode: |
|
Continuous – simultaneous signal to each output channel |
|
|
Gated: For burst generation |
|
| Driver Module |
|
|
| Input |
|
1 trigger, NIM (threshold approx. - 400 mV, neg. slope) |
| Output |
|
1 Laser head connector |
| Controls |
|
Output power tuneable with 10-turn potentiometer |
| Delay |
|
20 ± 2 ns (from trigger input to optical output), jitter < 20 ps |
|
| Dimensions |
|
|
| Large: |
|
Width: 449 mm |
|
|
Depth: 310 mm |
|
|
Height: 133 mm |
|
| Medium: |
|
Width: 449 mm |
|
|
Depth: 310 mm |
|
|
Height: 177 mm |
|
| Small: |
|
Width: 237 mm |
|
|
Depth: 310 mm |
|
|
Height: 133 mm |
All Information given here is reliable to our best knowledge. However, no responsibility is assumed for possible inaccuracies or ommisions. Specifications and external appearences are subject to change without notice.
© PicoQuant GmbH, 1998 - 2006
last updated 20.06.2006
